Counting matching models…
This is a mounting cover/frame for a Rosahl M-1J1R electric dehumidifer membrane which can be used for a filament drybox of around 20-30l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…
This print allows you to put cherry profile keycaps onto a membrane keyboard. There are two files, one with and one without the “nub”. The mechanical keyboard I have, Razer Ornata Chroma, has a mechanical aspect to it, so the nub is…
What's this? 3D printed PVC Membrane clarinet based on the plans and ideas from Nicolas Bras https://www.youtube.com/watch?v=Jk7J4_bneZo This instrument is quick and easy to print, and easy to play, you don't need any technique, just blow…
made this for my generic keyboard, i hope it works for anyone else!
Very simple enclosure for a 4×4 membrane keypad. Started as a test-print to check if I have the dimensions right. OpenSCAD files are included. Perhaps you find this useful for your own projects. Print instructions The screw holes are…
Print in TPU with the smallest layer lines you can! More details TBA
Customized with CS logo on it. Print as it is with supports. Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: No Supports: Yes Resolution: 0.15 Infill: None Filament: Sunlu Pla+ White Category: Computer
Inspired by the membrane clarinets created by Nicolas Bras. Designed so everything is inline like a traditional clarinet. Requires the use of o-rings to seal the membrane compartment. O-ring dimensions: Inner Diameter ¾" Outer Diameter…
I made this to change my membrane keyboard to a mechanical keyboard (should work on any membrane keyboard but I modeled it for the RedThunder 60% Gaming Keyboard (link) YouTube Video Steps 0. Get Keyboard Take off key of membrane keyboard…
This is a filament drybox for a single spool based on a cereal box. It does not require any desiccant but leverages a Rosahl electric dehumidifier membrane. The original cover plug of the cereal box is replaced by a 3D printed plug which…
Membrane keyboard version with Helldivers 2 logo on it. Print as it is with supports.
Please see my updated version of the Rosahl M-1J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Remix based on Whitespace's FPV-Wing-Racer . Wings: Printed with PETG onto 0.1mm BoPET sheets for an extremely smooth surface. (The process is very similar to this study here: https://www.nature.com/articles/s41598-021-98242-y ) The black…
This is the new mounting cover/case for a Rosahl MDL-3 electric dehumidifer membrane as alternative to the original ( https://www.printables.com/model/932682-mounting-cover-for-rosahl-mdl-3-electric-dehumidif ) and uses an off-the-shelf…
Please see my updated version of the Rosahl M-3M1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Customized with CS2 logo on it. Print as it is with supports. Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: No Supports: Yes Resolution: 0.15 Infill: None Filament: Sunlu Pla+ White Category: Computer
Lifestraw Peak STRAW adapter for backflushing with a bottle this filter is very strangely designed. the clean end only has a mouthpiece and no way to use a syringe or bottle in order to backflush it. the recommended way according to the…
There are two files, a version that is .8mm thick and a version that is .6mm thick. The .8mm version is almost silent, but the buttons are a little stiff. The .6mm version has a soft audible click, but the buttons feel a bit better to…
This build was inspired by Nicolas Bras and his creaton of membrane clarinet with evenly spaced holes. This is not maybe that precise with tones, but it it based on same scale and tone progression he uses. For me best worked to just…
Customized with Overwatch logo on it. Print as it is with supports. Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: No Supports: Yes Resolution: 0.15 Infill: None Filament: Sunlu Pla+ White Category: Computer
I broke the clips for the metal support bar during dismantling and decided to design some replacement ones. May require a bit of heat to get the metal bar seated properly and moving fairly freely. Model might need a bit of tweaking for…
Arduino membrane keyboard (both 4x4,3x4 are very similar in actual size) case and mounting plate made for vertical position and possible hidden ribbon cable. it has 6 mounting holes (4mm diameter) for woodscrews. There are later covered…
This is a remix of an already existing design on Thinghiverse, customized with Destiny's logo on it. Print as it is with supports. Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: No Supports: Yes Infill: None Filament: Sunlu…
I broke the clips for the metal support bar during dismantling and decided to design some replacement ones. May require a bit of heat to get the metal bar seated properly and moving fairly freely. Model might need a bit of tweaking for…
I made a clicky button flex PCB that lets you have ds phat/gba sp style buttons. Ive made a hard membrane to replace the original membrane. More info about the clicky button pcb can be found here -…
I found that both the 0.8mm and 0.6mm variants of @8BitDrip_2287972 's RG35XXSP Membrane Inserts were too thick, so I used Blender to make an even thinner 0.4mm variant. I find this thinner variant works very well in my RG35XXSP and feels…
Please see my updated version of the Rosahl M-3J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Customized with Apex logo on it. Print as it is with supports. Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: No Supports: Yes Resolution: 0.15 Infill: None Filament: Sunlu Pla+ White Category: Computer
Introducing the Membrane! An amalgamation of my favorite parts of different dart centering devices I've used. This kit includes BCAR and PCAR options, and options for railed and railless muzzles. This kit prints without supports. All…
This is an updated version of the M-3J1R outside mounting cover . It simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and no…
See our latest addition to Rosahl membrane mounting covers with a thread-mount cover for the M-3M1R membrane which simplifies mounting quite a lot to just drill one large hole.. This here is an updated version of the M-3M1R outside…
This is an updated version of the M-2J1R outside mounting cover . It simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and no…
Stretch a membrane like a cut vinyl glove, balloon, etc. over the top, secure it with a rubber band, and blow into the side. The hole on the bottom is sized for a 22mm/0.8in outer-diameter pipe (I'm using a PVC pipe labeled as "½ inch")…
Update 7/12/24: Minor changes to the SCAD source. Added a 60-key model with a 12×12mm grid. Update 7/4/24: Updated SCAD source to make customizing easier. Added a ridiculous credit card sized keypad with 60 buttons (requires 1/8" wide…
Mechanical keyboard version with the Titanfall logo on it. Print as it is with supports. Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: No Supports: Yes Resolution: 0.15% Filament: Sunlu Pla+ White Category: Computer
Update I made a new mounting cover for the Rosahl MDL-3 membrane, which uses a standard gasket instead of the rubber o-ring and is simpler to assemble. Also the gasket frame fully covers the interior of the case, hence is more protective.…
Ring printed with TPU, resolution 0.1mm Membrane printed with PLA, resolution 0.1mm, concentric infill in top and in bottom
This is an updated version of the M-1J1R outside mounting cover . It simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and no…
plastic membrane for dpad on the extremerate or gearZ clicky kit for the dualsense/dualsense edge as the original rubber membrane dpad direction would start to get stuck and very hard to actuate after only 1hr of use, you can also do the…
This is a mounting cover/frame for a Rosahl M-3J1R electric dehumidifer membrane which can be used for a filament drybox of around 50-70l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…
Printed from PETG plastic with a layer of 0.2 mm and 100% infill. Bolts M5 x 30 mm
This replacement button membrane was measured from a first generation Xbox360 wired controller. It will require some additional cutting after using the old membrane as a template for where to cut. I decided not to model in those cuts…
Its a cool membrane weed keycap
Case for a generic 4x4 membrane keypad attached to a DF Robot Beetle CM 32U4 microcontroller. The Beetle has a small form factor and just enough pins to attach to the membrane keypad. The keypad sticks to the top surface while the Beetle…
Mold to make Your own silicone membrane for 3M masks. NOTE!!!: Use made membranes on You own risk. Close the mold and secure with 4pcs M3x25 (or longer) with nuts. Use syringe with luer tip to push silicone into the mold using hole in the…
DruLuSchKo DRUckLUft zu SCHall KOnverter in Größe M. Erzeugt einen mittleren Ton und kann komplett am Drucker erstellt werden. Laut ist das Teil zudem auch. Vor allem, wenn man das trichterartige Ende anschraubt. Je Länger man den…
Please see my updated version of the Rosahl M-2J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Assembly. There are two versions. The voicecone version is open ended and works by speaking/shouting into the open end. The speaker cone version is designed for a JBL Go 2 bluetooth speaker. This model is designed to work with the rear…
Rosahl dehumidifer membranes of the M-series come with a flat/mat gasket. However, I managed to break one of mine by not placing it properly underneath the membrane bottom and it got twisted around the mounting screws during fastening.…
I design my models in tincercad if somebody now how to get fusion 360 can you comment how
Replacement peg for the inside of a Roncato brand hard shell suitcase. This is the peg onto which the built-in separating fabric clips. Printing tips Suggest printing with the peg laying down on the build surface for maximum strength. I…
DruLuSchKo DRUckLUft zu SCHall KOnverter in Größe S. Erzeugt einen hohen Ton und kann komplett am Drucker erstellt werden. Laut ist das Teil zudem auch. Es gibt eine gewisse Auswahl an Teilen. Das Gehäuse ist der "Körper". Den gibt es mit…
The tin can phone can be used to exchange with each other by a taut/tense cord. The membrane is printed with a large surface, so compared to a classic tin can, the sensitivity could be slightly higher. The attached photos giving an…
A filter holder for experimenting with hydrophobic filter media as an anti-humidity barrier for outdoor electronic enclosure vents. Intended for use in passive/convective cooled systems; attaching a fan directly to the filter may result…
Video link This was an attempt at making the Wurkkos TS10's button feel more like that of an "o-ring modded" Lumintop FW3A's button. It wasn't really all that successful, but it did result in a considerably stiffer, clickier button with…
Designed by Dr Joshua Tully for work in the Macpherson Group at the University of Warwick. Details: This electrochemical cell is designed to enable the electrochemical etching of the graphite layer in implanted diamond samples. Etching…
DruLuSchKo DRUckLUft zu SCHall KOnverter in Größe L. Erzeugt einen tiefen Ton und kann komplett am Drucker erstellt werden. Laut ist das Teil zudem auch. Es gibt eine gewisse Auswahl an Teilen. Das Gehäuse ist der "Körper". Den gibt es…
This is a replacement 3D Printable membrane for the nylon coupler used on all the axis of the 3D Cloner STG3, so you don't need to buy new couplers from them everytime this small plastic piece gets damaged, specially the one in the Z-axis…
The hum-into-it classic. Stretch a square of baking paper (or a bit of freezer bag) over the turret, push the ring on to hold it, then hum - don't blow - into the wide end. The paper buzzes and turns your voice into a kazoo. Great for…
I almost never use AI tools for 3D model generation, however I decided to play around with Grok AI to see if it could generate Matlab code to create an STL file of the Matlab logo. Lo and behold it was able to successfully do it in two…
EN : Originally, I just wanted a quick storage solution for my Braun Series 9 razors. Hence the dimensions of the box. I had the idea of using a TPU membrane instead of foam. So I designed a lid for the open box using the same principle.…
Ever had to discharge water from an 9 year old speaker because you thought it is water proof? Well you are at the right spot… kinda. The battery compartment was once damaged a long time ago due to throwing it around, thus making it water…
imprimer en TPU 45D Category: Kitchen & Dining
Replacement plastic housing for the Type-C nitrate membranes by EZkem(SKU: A000397) ( https://www.ezkem.com/parts/membrane-type-c-25-mm/ ). This is suited to fit ezkem manifolds…
Membrane pour commutateur de pression NEMA 230 V Diamètre : environ 40 mm sans œillets 4 perforations Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: No **Filament:** prusa filament flex Category: 3D Printing
Uses the plug circled in red to connect to the m-2j1r. The power supply can output 3v 3amps which is the requirement to operate from rosahl. You can find it here: https://www.amazon.com/dp/B07N18XN84?ref=ppx_yo2ov_dt_b_fed_asin_title…
This is a newly interpreted version of the two models: ‘Ultimate Western Blot Incubation Trays’ by Ultimo3d and ‘Western blot, antibody incubation, and protein detection box; medicine box’ by Siiqi. This version also features raised dots…
Use in conjunction with Use "Abdeckung_Innen_Modifizierer" as a modifier as shown in the picture
Designed by Dr Joshua Tully for work in the Macpherson Group at the University of Warwick. Details: This electrochemical cell is designed to enable the electrochemical etching of the graphite layer in implanted diamond samples. Etching…
Uses the plug circled in red to connect to the m-2j1r. The power supply can output 3v 3amps which is the requirement to operate from rosahl. You can find it here: https://www.amazon.com/dp/B07N18XN84?ref=ppx_yo2ov_dt_b_fed_asin_title…
This build was inspired by Nicolas Bras and his creaton of membrane clarinet with evenly spaced holes. This is not maybe that precise with tones, but it it based on same scale and tone progression he uses. For me best worked to just…
Video link This was an attempt at making the Wurkkos TS10's button feel more like that of an "o-ring modded" Lumintop FW3A's button. It wasn't really all that successful, but it did result in a considerably stiffer, clickier button with…
Please see my updated version of the Rosahl M-3M1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Membrane keyboard version with Helldivers 2 logo on it. 0.15 layer height, 0,4mm nozzle I used Sunlu White PLA Print as it is with supports.
Pas grand-chose à dire, j'ai cassé le mien, donc je le refais. Voilà. petg support/yes
USE SUPPORTS, they will kill you trying to remove them, and you can't really take out the supports in the middle
Phospholipid Membrane Vesicle Pot : Good luck this is going to be a hard print. Imagine a Tiny Bubble... Think of a phospholipid membrane vesicle like a tiny bubble made of special building blocks called phospholipids. These bubbles are…
A remix of two keycaps to make an ESC keycap for membrane keyboards. Print settings Rafts: No Supports: Yes Filament: Black and/or white PLA
Upon request by users I made 3D-printable spare gaskets for all Rosahl M-Series dehumidifier membranes. Those include M-1J1R, M-2J1R, M-3M1R, M-3J1R, M-5J1R, M-7J1R and M-10J1R membranes. The models have the same shape as the original…
When doing a full shell swap on an original Xbox One controller (came with black “vcr” model), the home button in the revised housing was not pressing down correctly when assembled. This simple model is meant to be inserted into the…
This is an new/alternative mounting cover for the Rosahl M-3M1R membrane and USB-C power supply onto a filament dry storagebox, BambuLab AMS or Creality CFS or other multi-material-system or generic storage boxes for various applications.…
I saw a cool keycap but only for mechanical so made this real simple thing. Printed from PETG but PLA will do just fine too
Un adaptateur pour touche de clavier modèle clavier membrane vers touche Cherry MX
This model is compatible with the lego system.
Part of my 3d cell model. Print with the pegs on the bed so that you get the support material then you can stop it.
Membrane for ELKO/ELKO Plus outdoor electrical outlets Elnummer: 1252563 Varenummer: EKO09446 EAN: 7020160944610 Serie: ELKO Plus
# Transverse Dizi-Style Headjoint (Bb13, flush membrane, thick-wall embouchure) A 3D-printed transverse flute, converted from a fipple whistle design, with a dizi-style sympathetic membrane hole. Bore and tuning are carried over unchanged…
Needed a 1x4 case top use while prototyping, so here it is. Print Settings Printer: Da Vinci Jr (hacked) Rafts: No Supports: No Resolution: 0.2 Infill: 20%
Once upon a time I dropped my Samson G-Track microphone. The membrane holder which is made out of thin brass broke and the membrane was loose inside the microphone. Since it's an expensive microphone that was perfectly fine otherwise I…
Hi! This is a repository of .stl files and an assembly manual for the “BMV2-V2” (Birdbrain Membrane engine Version 2 - V2) pressurized gas engine. A video showing off the engine and some of its performance figures can be found on Youtube…
Print upside down, so that the smallest inner ring that touches the e-switch faces up when printing. Print with 0.2mm layer height. The "minus 0.3mm" version works well, “v2” membrane gives different tactile feel.
The animal cell membrane for my cell model. Use the peg to hold it off the build plate to get the supports.
This goofy little instrument is kind of like a bugle, but instead of modulating the tone by pursing your lips, the tone is changed by varying the tension in a membrane that creates the vibration. It consists of a horn with a membrane…
