10mm Reversible Ratchet Wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tested and working. I made this 10.4mm…
- Ocena
- 0 / 5
- Polubienia
- 59
- Pobrania
- 325
- Wydruki
- 1
- Wyświetlenia
- 1452
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is tested and working. I made this 10.4mm inside to make it fit well.
Tolerances are 0.2mm so print this first- https://www.thingiverse.com/thing:3569489
More sizes to come. I originally made 8mm and 10mm but was asked to design some sizes up to 14mm ;D
Utilizing print in place one-way bearings. No support needed.
If you have any issues printing please let me know, feedback is key to better designs ;)
If i made a positive impact in your life please support me via paypal :D
https://paypal.me/drewbrewchan?locale.x=en\_US
Thanks for stopping by, come back soon ;)
https://youtube.com/shorts/ZaUCPQPCseQ?feature=share
Category: Engineering