120mm vent fan enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A solution that I created to increase air movement and fight humidity on passively ventilated sleeping quarters/cabin.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed separately with PETG, didn't use supports. I melted the fan connector to keep it attached. Channel has room for ~100mm x 40mm vent, so it could be installed on top of existing vent cap
I used 4PDT ON/ON switches, case fan, dc barrel jack and gutted cat5 cable.
HI/LO drops 12V to 7V, I preferred to wire the ON/OFF to positive and HI/LO to negative side
Model has multiple channels for wiring and room on top for future update (sensors, IoT, PWM, ESP32, etc.)
3 pin fan connector is a bit more complex subassembly, but here is a rough mockup
It's a bit complex but well thought concept.
Fan change is tool-free, just twist the shell 30 something degrees counter-clockwise.
Fan slot has some room for vibration reducing padding.
And as always with electricity and pointy things: you are the one responsible, be careful, use your head and have fun!