Corner Radius Gauges with Box and Parametric Fusion360 Script
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Fusion360 Script which creates Corner Radius Gauges and a Box for the gauges.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
What is this?
This is a Fusion360 Script which creates Corner Radius Gauges and a Box for the gauges.
You will be able to set the the amount of gauges, if you want a box for them, if you want outer or inner radiuses or both.
Info
This script can take a while, depending on your choice for the radius start and end parameters. So for testing purposes try to choose a lower end radius first.
I would use 0mm as start and 5mm as end radius to see what the script will create for you.
I've added a description to every setting and I hope the description will help you with filling in the parameters ;-)
Print files
I've added some printable files. You need 6x3 magnets for the box (8 of them).
https://www.amazon.de/dp/B08F745KY5
ATTENTION
This script is in BETA stadium, which means there will be edge cases which I didn't manage to test and which will raise errors or which will cause fusion to not create the bodies properly.
If you find such an error please write a comment with your settings you used in the script and I'll try to fix this.
How to install
https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/How-to-install-an-ADD-IN-and-Script-in-Fusion-360.html