Corner Radius Gauges with Box and Parametric Fusion360 Script
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Fusion360 Script which creates Corner Radius Gauges and a Box for the gauges.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
What is this?
This is a Fusion360 Script which creates Corner Radius Gauges and a Box for the gauges.
You will be able to set the the amount of gauges, if you want a box for them, if you want outer or inner radiuses or both.
Info
This script can take a while, depending on your choice for the radius start and end parameters. So for testing purposes try to choose a lower end radius first.
I would use 0mm as start and 5mm as end radius to see what the script will create for you.
I've added a description to every setting and I hope the description will help you with filling in the parameters ;-)
Print files
I've added some printable files. You need 6x3 magnets for the box (8 of them).
https://www.amazon.de/dp/B08F745KY5
ATTENTION
This script is in BETA stadium, which means there will be edge cases which I didn't manage to test and which will raise errors or which will cause fusion to not create the bodies properly.
If you find such an error please write a comment with your settings you used in the script and I'll try to fix this.
How to install
https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/How-to-install-an-ADD-IN-and-Script-in-Fusion-360.html