1 / 2
Replacement Water Tank Lid for Bambino Espresso Maker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Water Tank Lid for Bambino Espresso Maker (Non-Plus model)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits tight and snug with Standard Cura settings (layer height 0.2 WALLS: 0.8mm thickness, 2 wall count - TOP/BOTTOM: 0.8mm thickness, 4 layers).
In case it's ever useful, I've also attached a 5x5mm grid of the water tank used to sketch this (illuminated from below).