1 / 2
Replacement Water Tank Lid for Bambino Espresso Maker
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement Water Tank Lid for Bambino Espresso Maker (Non-Plus model)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 74
- Makes
- 0
- Views
- 252
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits tight and snug with Standard Cura settings (layer height 0.2 WALLS: 0.8mm thickness, 2 wall count - TOP/BOTTOM: 0.8mm thickness, 4 layers).
In case it's ever useful, I've also attached a 5x5mm grid of the water tank used to sketch this (illuminated from below).