1 / 2
Ubiquiti Unifi G4 Doorbell Pro slide over cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple cover to hide the angle at which the standard plate sits against the wall.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
This is a remix of the original model to remove the screw down tabs - so you can slip it over the original doorbell - Its more for aesthetic purposes but hides the gap that the standard mounting has due to the plate's taper inward.
Covers up the hole I had in the wall behind, as well as the tapered edge. Check the photos.
I printed this out with TPU and seemed to work well. Adjust to your environment as required.