Changed dimensions for better fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found the original to have a tight fit for two tips, and the cover was super loose. Tips were hard to pull out.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The M5 and M6 holes were very tight when first printed, so I scaled the holder by 1% in all dimensions. This led to a great fit for the tips, plus a better tighter fit into the vertical rail. I found the small tips hard to grab as they were too deep into the holder, so I took a few millimeters off the top of it.
The cover would simply fall off originally. I changed the dimensions in multiple axes for a perfect tight fit. The layer lines lock it in place. I plan to store my press in a cabinet sideways so this will keep them in place.