Soap Dish with Drains and Walls (for round sinks)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soap dish prevents water from accumulating.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 2
- Wyświetlenia
- 95
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This dish was inspired by others here - especially the wave pattern. However, I wanted it to drain on one side towards the sink and I wanted to include a wall so that the soap didn't slip off. The dish sits flat on the surface and the bar of soap sits flat on the dish. However, the ridges have a slope to guide water out.
This model is fully parametric, so I can adjust the dimensions. Just ask. I have included two sizes. Printing requires rafts and bridges, but I didn't want a flat bottom to retain water.
This is different from my earlier soap dish model because it is rounded and wavy so it will look better with round-shaped sinks.
Edit 2026-09-19: I added a new "simplified" version of this dish. It is the same size, but I tried to make it easier to print with less supports: 45-degree angles on the bottom and a flat front