Dual Power Bar Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount two back-to-back power strips anywhere with this screw-on holder.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This printable mounting bracket is designed to hold two multi-outlet extension cords (power strips) back-to-back. The component features precise slots that capture and align the ends of the power strips, locking them in place without additional hardware. Once assembled, the unit is fastened in place with screws. This setup allows each power strip to face outward, maximizing accessibility while keeping cords tidy and concealed. Ideal for desks, home workshops, or entertainment setups where neat cable management is key. The design is modular and customizable to fit different strip sizes.
No special instructions are necessary. I print with supports, so that the interface ends up on the inside of the bracket (see attached GCODE). I dare say printing on the side would be just as simple.