Bambu Lab H2D 4 in 1 adapter with spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This replaces the existing Bambu supplied spool holder with a roll holder that also allows you to fit the 4 in 1 adapter
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 141
- Wydruki
- 0
- Wyświetlenia
- 1159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is only suitable for a Bambu labs H2D.
This replaces the existing Bambu supplied spool holder.
NOTE!
Addon part for second 4 in 1 adapter available here:
https://www.printables.com/model/1310008-addon-for-h2d-4-in-1-adapter-with-spool-holder
The bracket is designed for the 4 in 1 adapter.
I realise the placement isn't suitable/ideal for some uses, I use it for the non AMS side, connected to a dry box.
You will need 1no. M4 machine screw with 11-12mm of thread.
The spool should be placed so that it will turn clockwise.
I would not recommend tightening the spool holder too much because it will break.
I used Gyroid infill at 20%, PETG.