Bambu Lab H2D 4 in 1 adapter with spool holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This replaces the existing Bambu supplied spool holder with a roll holder that also allows you to fit the 4 in 1 adapter
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 141
- Makes
- 0
- Views
- 1,159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
This is only suitable for a Bambu labs H2D.
This replaces the existing Bambu supplied spool holder.
NOTE!
Addon part for second 4 in 1 adapter available here:
https://www.printables.com/model/1310008-addon-for-h2d-4-in-1-adapter-with-spool-holder
The bracket is designed for the 4 in 1 adapter.
I realise the placement isn't suitable/ideal for some uses, I use it for the non AMS side, connected to a dry box.
You will need 1no. M4 machine screw with 11-12mm of thread.
The spool should be placed so that it will turn clockwise.
I would not recommend tightening the spool holder too much because it will break.
I used Gyroid infill at 20%, PETG.