1 / 7
100 mm Hose adapter to Genvex exhaust valve
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 100 mm Hose adapter to Genvex exhaust valve
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Adapter for 100 mm flexhose to Genvex exhaust vent.
The model has holes for magnets 10 x 4 mm - with N52 strength 3 magnets are enough, but there are 6 holes if you have lower strength magnets.
Inside the shaft are small taps to hold the hose in place while still allowing the hose to be easily placed and removed.
A bevel along the “Genvex” part ensures airflow around the middle part of the Genvex vent.
If you use the magnets from Maker's Supply stack 2 in each hole.