Servo Tester with 0.91in OLED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a servo tester with a 0-91in OLED and here's the 3d printed boxes for both variants.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Made a servo tester with a 0-91in OLED and here's the 3d printed boxes for both variants.
For 4USD+shipping I'll ship a PCB and code. Depending on what I have components wise I might ship buttons, connectors etc also for a bit extra. That's probably less than a coffee. 😉
The design is for snap-lock and was adapted to fit my printer and filament settings but might differ in your printer so changing temp and flow might be needed for perfect fit. Printed on a MK3S 0.4mm nozzle and Prusament PLA settings 0.2mm)
Parts list:
1x PCB
1x PRO MICRO/TYPE-C USB 5V 16MHz 3-15V
1x 0.91 Inch 128x32 IIC I2C White OLED Display
2x 4x3x2.5 tact switch
1x RV09 Vertical 12.5mm Shaft 10K Ohm
1x JST Right Angle, XH2.54MM, 7P
1x Capacitor 16V >220-330uF (servos can create current spikes)
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6