E3D Toolcahnger Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for E3D's Toolchanger to close the upper zone.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 887
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Enclosure for E3D's Toolchanger.
It close completly the printer using 3,5 to 4 mm pannels.
It can be printed in any material, inside the printer it can reach temperatures over 40º, so I recomend print it with PETG.
I use autoadhesice strip magnets to close the front part, also I use the Prusa aluminium roods from the MMU2 to make the handles (it requires 4 roods).
Several M3 nuts used to mount the structure, also a long Aluminium Square rood used to make it stifter, also it can be used to atach a camera.
Materials Used:
4 - M3x25
16 - M3x10
2 - M3x14
2 - M3x30
Aluminium rood, 16x16x490
4 - Aluminium rood from Prusa's MMU2 buffer support.
Some pieces are to large for MK3, so this job is for the toolchanger or Prusa XL.
Dedicated to Sanjay, I never meet him, bit it was my inspiration and the beggining in 3D.