1 / 1
Lathe 4-Jaw Chuck Spider / Stop - Set of 5 — zdjęcie 1

Lathe 4-Jaw Chuck Spider / Stop - Set of 5

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A selection of chuck stops for short workpieces - 4-Jaw version. Thicknesses 5mm, 10mm, 15mm, 20mm and 25mm.

Ocena
0 / 5
Polubienia
5
Pobrania
65
Wydruki
0
Wyświetlenia
216
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

A set of lathe spiders for 4-Jaw lathe chucks with jaws up to 26mm (nom. 1") wide.  The chuck I made these for is a 200mm.

(I have also posted a 3-Jaw version)

I created a parametric model in Fusion so any depth or jaw width can be added if requested.

Alternatively small changes in depth can be altered by adjusting Z in the slicer.

I have made several of the 3-Jaw version but, at the time of writing, have not yet needed the 4-Jaw.

3-Jaw: https://www.printables.com/model/1287045-lathe-3-jaw-chuck-spider-stop-set-of-5

I printed in 3DQF PLA+

Tagi