1 / 4
Star Wars Imperial Cog Apple Watch Charging Stand — zdjęcie 1
1 / 4

Star Wars Imperial Cog Apple Watch Charging Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I imagine this sitting next to a Stormtrooper's helmet when he gets back to his quarters after a shift.

Ocena
0 / 5
Polubienia
5
Pobrania
9
Wydruki
0
Wyświetlenia
389
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I imagine this sitting next to a Stormtrooper's helmet when he gets back to his quarters after a shift.

This prints in several easily assembled pieces. It also comes apart easily if you need to get the cable out to take it on vacation.

The loop in the cable is on purpose so there isn't stress on the joint.

Assembly

I painted the pieces with gloss model paint to give them a nice shine.

  1. Use Super Glue to connect the connector pin to the receptacle wedge.
  2. Line up the slot on the receptacle and the wedge and glue them.
  3. I didn't glue the stem into the base or the wedge.
  4. Line up the number 1 on the cog with the number 1 in the hole on the base. You can glue them if you want.
  5. Put the cable through the base.
  6. Put the charging puck in the receptacle. Loop the cable and push it in the channel on the stem.
  7. Line up the channel on the stem with the channel on the bottom of the base and feed the cable through the channel.

 



 

Tagi