AUDI A4 B6 Wiper adapter to J hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the original plastics. Compatible with non brand specific J hook wipers. Might work with other VAG cars too.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 706
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I recently purchased a old A4 and the wiper mount broke when I went to replace the wipers.
To replace the original plastics I quickly designed this mount so I can replace the wipers with standard J hook wipers since that seems to be the most commonly supported by aftermarket wipers.
I can't guarantee this will fit any wiper, since I have only tested with the wipers I bought myself. If you have any issues let me know and I'll try to fix them.
I've printed them with a wall thickness of 5 lines, so the hook itself is 100% filled in with lines that go in the direction of the hook.
Internal overhang for the clips that it hangs on with that might be difficult if your printer doesn't deal well with overhangs, but prints well on my S1 pro.
There is probably some improvements to be had, like I suspect it might be a bit weak still.(testing in progress ^^,) So if you can think of anyting, feel free to edit and remix as you see fit!