Liczymy pasujące modele…
General Info & Fasteners The dust cap on my Audi S4 headlight was super cracked and not watertight at all so I designed this replacement. I've only used it on the right hand side headlight but if you mirror it it will probably fit the…
Printed with 0.2 mm nozzle, 0.08 mm resolution. Support everywhere. Two holes for steel pins added for better rigidity of clip, pins additionally glued with epoxy. Enjoy. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts:…
for Audi A4 B6/B7
Remixed and improved Phone stand for VW Passat B6 Bluetooth by: Adrian-Claudiu Bîcleșanu Changes of this remix Sacrificial layer for better print of holes for screws on the base bracket Redesigned left/right and down bracket Bigger holes…
Please don’t forget to like the model here on printables if you enjoy it! This is a 1:15 scale model of the 2025 Honda CB650R, meant to be printed in pieces and assembled without using glue (With the exception of second color for the…
I believe I printed top down I printed with ASA and have been using it for about 1 season so far with good results.
I designed a custom mod phone stand for my VW Passat B6 bluetooth stand, the measurements are for my phone - Samsung Galaxy A70 with protective cover but it can be suitable for other phones with same size or bigger, can be adjusted. I…
This is a 2008 Volkswagen Passat B6, it comes with two versions, a passenger, and a Polizei version. Happy printing!
This is the cap for the tow hook on the front bumper for Audi A3/A4 2001-2005 B6. Mine is delicately and diligently broken by the tow car driver. So I designed a new one. (Note that the photos are from an older version. The one I uploaded…
This is untested, but should fit the following models: Audi B5 A4 FWD 1.8T Audi B5 A4 Quattro 1.8T Audi B5 S4 All 2.7T Audi B6 A4 FWD 1.8T Audi B6 A4 Quattro 1.8T Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi C5 A6 Quattro 2.7T Audi C5…
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
I couldn't find a good speaker adapter for my '03 Audi A4 so I designed one based on the OEM speaker. The model has a hole for Metra 72-9002 speaker harness adapter to slide into and 2 zip tie slots for cable management. There are 3…
Rear Main Crank Seal Install Tool for Mazda Miata MX-5 B6 BP Engines As seen in this video: https://www.youtube.com/watch?v=T0L0Rpsbdek
Cover for Audi A4 B6 for 2 Din Radio
A simple print that fits into the space above the Mamiya RB67's ground glass without interfering with any of its viewfinders to indicate framing for 35mm film through the RB/RZ67.
Maqueta del Red Bull de F1 2010
Audi A4 B6 Konsolen Organizer. Ich empfehle PETG oder ABS
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
Fuel cap strip for Audi A4 B6, B9 . Tested on 2004 year diesel version. Printer: Creality Ender 3 S1 Filament: Overture TPU Black 1.75 Nozzle: 0.4mm Infill: 100% Nozzle temperature: 210 Bed temperature: 60 Print speed: 40 There are great…
Replacement headlight covers… Print it out, insert the original seal and snap it onto the headlight.
Here is the Audi A4 B6 in silhouette Suitable as a wall or window decoration
Da bei meinem Intex ZX300 Poolsauger nach jeder Saison der Antriebsriemen für die Reinigungsbürste das Zeitliche segnet und man von Intex keinen Ersatz dafür bekommt habe ich mal einen Riemen mit dickerem ‘Rücken’ gezeichnet und in TPU…
Non-destructive and 100% reversible mod for original Mamiya RB67 PRO-S 6x7 film back to 35mm panoramic frames 24x68mm. If this was useful consider a donation of any amount.…
These are replacement gears for the headlight adjuster mechanism on my B6 A4 with bixenon headlights. The gears often break or strip leaving you with no way to adjust the aim of the headlights. The assembly shown is for the up and down…
A grid or honeycomb can be fitted over a light source to help control the spill of the light it produces. They look like bees' honeycomb (hence being known as honeycomb grids) and are great for helping to make a beam of light that is soft…
This stand is very useful, when you charge / discharge your batteries. It provides you a better view in order to control parameters and measure values. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Yes Supports: Yes…
Audi A4 B6 front seat clip for backside panel with M3 screws as a additional rigidity support. Enjoy. Print Settings Printer Brand: Raise3D Printer: Pro2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Filament: Devil Design ABS+…
A common issue with the projectors in OEM Valeo Bixenon housings fitted to B6 A4's is that the reflector bowl can become scorched which results in diminished light output. Instead of replacing the whole headlight housing, only to have the…
I had been looking for the original testplate for ages, and decided to give it a go. I designed it to be used with exisiting focus screen. Watch the video on how to use it below :-)
S37x9 - Grundplatte B67 für Lochwände mit 37x9 Raster ( 9x9/37er Raster ) - Grundplatte für geringe Traglast - Als Basis für alle S37x9 - B73-B221 Modelle => S37x9 Family - Passgenau für pulverbeschichtete Lochwände - Prusa Print-Mode:…
Light shades for the Chihiros WRGB II series aquarium light. 1x per side for WRGB30 II 2x per side for WRGB60 II
Print in PETG, PLA is to fragile and this print is very thin. Print in 0.16 layer
A snoot is basically a tube that goes over the front of your light/flash unit and creates a hard, concentrated beam of light. A snoot allows you to light your main subject – without lighting the surrounding scene. And this can be great…
This is a protective case for the SKYRC B6neo and B6neo+ I am used to just throw my lipo charger inside my backpack and I quickly ended up breaking the screen. With this case that's no longer a problem. No supports needed. No extra…
This was designed to fit the B6.4 Kit towers Parts should be printed solid in TPU for best results. I added a v2 model and removed the v1. There was a wall too thin to print properly with a 0.4 nozzle. Also added a lightweight model that…
Use a material that can deal with the heat. PETG should last well enough. Suggested print orientation:
Replacement headlight covers… Model created by redrawing a 3D scan of the original cap Print it out, insert 6x hot nut M3x5x5 + 6x M3x8 screw and insert the original seal and snap it onto the headlight.
This is a pin for Passat B6 Rear Window Regulator A remix that resized the parts so it can be printed TIP ( the pin can be placed with a Philips screwdriver to prevent drops ) I used PETG The original creator Suggested TPU
It is a phone holder for VW passat car fo Iphone XR and Iphone SE. Phone must be in silicon case. Iphone XR holder was designed for silicon Moshi case. Iphone SE holder was designed for no name silicon case. Print instructions Easy print…
Hi I created a door clip for Audi A4 B6 (maybe Seat also) . Original Clip is really expensive, so I created new one and added more materials - after testing now I can dissasemble door more than once or twice without breaking this clip. I…
SPINKA TAPICERKI DRZWI AUDI A3 A4 B6 B7 EXEO
use 100% infill and add the pause macro at the right layer. I used a 0.25mm nozzle with 0.1mm layer height this is the charger I got from aliexpress for my passat b8, but they say they have models for Passat B6/ B7/ B8/ ARTEON/ CC/ R36.…
Front Bumper for some RC-Cars from Associated. Print with Support
iFlight BEC. Uses balance lead plug from 4-6s.
This is to replace a mirror clip for an audi A4 B6, year 2002. I lost the metal part so this is a full replacement of the part. You could add double side tape to block the mirror better. The v2 is more adjusted and more resistant, print…
Light Modifier - Fits the Neewer RGB61 RGB Video Light. USE M3x25 mm PRINT INSTRUCTIONS: Print with supports for the bottom
Snug fit. Better use PETG, because bearing may become hot, when alot of breaking.
rear lens cap
This is a derivate from my earlier posted iMax holder. I found out that this was a fake charger, so I felt needed to buy another one: the original charger from SkyRC! which is much better. Three parts: Base, shakle and the nest. It is…
The PCB is fixed from behind with small sheet metal screws. The ashtray itself has to be cut open to make room for the 3D printed part. Of course, this model can also be used as a universal mount for the Helix Director. We generally…
Arris XB6 cable modem wall mount. For Bluecurve, Helix, and Xfinity modems. Print Settings Supports: No Infill: 25 Category: Organization
ALPA RB67 Viewfinder Adapter takes 78x78mm focus screen
Hi, i've designed it for myself, but maybe you will find it useful also ;) I've 3D scanned the glovebox and then designed it to fit Monster can pretty tight, printed with PETG with 15% infill, it weight around 100g #Update: Added .stl…
Holding brackets for the IMAX B6 Lipro Charger to mount it on a Table or a wall. Printed with simple PETG. Make sure to use PETG if you are mounting it outside the house, the PLA will snap off if you have high temperature differences. If…
I recently purchased a old A4 and the wiper mount broke when I went to replace the wipers. To replace the original plastics I quickly designed this mount so I can replace the wipers with standard J hook wipers since that seems to be the…
The piece from my Volkswagen Passat B6(3C) front right central vent that adjusts the ribs was missing and I decided to mock up a stl after the left central vent and reverse it. Printed using black ABS and it works/looks like it belongs…
Stable holder with 70° inclination for standard baby displays / monitors or alternatively smartphones. I have attached the display to the frame with two small strips of Velcro tape so that it does not slip. Compared to the factory…
This is a very crude and simple box, lid and adapter to fit a Mamiya RB67 while I was waiting for a good price on an OEM one. Nothing fancy but it worked.
Custom-made to fit the middle console/compartment for a VW Passat B6 2005-2010. high enough to still use the sliding-hiding-thing when not in use (flashlight removed) Made this for practical use, and so the flashlight is always at hand…
simple keychain with a picture of audi a4 b6 avant, enjoy it Powered by Make My Sign from MakerWorld (https://makerworld.com/makerlab/MakeMySign)
the original part was broken in a way that it could not hold the compartment door closed properly anymore, so i modeled a similar part to replace the OEM part, this one does the job well and was a quick print.
Replacement back cap for a Mamiya Lens. Snug fit (tested using 127mm f/3.8 Sekor Lens) Printed in PETG for flexibility
Enjoy some additions for your Associate B6.1 Buggy. Currently I have a removable electronics tray, tower guards, and the shock towers. I will add more as I have time and develop more ideas.
Needed to wall mount my B6AC charger to the wall for a bit of space saving so popped onto F360 and made this. Both brackets included in the one model .3mf download
21 May 2026 Update Fixed the clearances in the back mount — Pro SD backs now attach without any issues Removed the protruding “tooth” at the bottom of the mount that prevented early RB67 Pro backs from fitting properly Added a body…
Modified from Aqara’s official adapter STP files. Created 2 variants: A tiny insert that prints in 5 minutes that should fit into "Adapter 5" that comes in the box with the U200. The entire adapter where the interface point will work…
this is part specific, guaranteed fitment with… asrock b650i lightning, with IO plate removed asus 4060 lp with io shield removed and up to about 69-71mm cpu cooler clearance, I have used a IS-55 with a P12x25mm you want a 120mm fan for…
Description I just picked up a TOADS DB6 Digital Interface from Temporarily Offline (KM9G). I am in no way associated with KM9G, just needed a protective box for my TOADS. Find me @ www.K5ACP.com Printing I printed in PETG with 3 walls/3…
As I had no lid for the back opening of my RB67 I remixed DavidB75's focus adapter to a simple cover. I also added a second version that uses less material, but I have not tested that one yet.
Assembly: Print the base and the ball joint, add an M4 brass threaded insert in the ball joint with a soldering iron, and screw them together with an M4x10 flat head screw. Clip your phone holder on the ball, and place the assembly on…
THIS THING IS PROVIDED "AS IS"! USE IT AT YOUR OWN RISK!!! I'm not responsible if your dear camera hits the ground! This is a two-piece adapter. Main body can easily withstand stretching load. It takes bending but may degrade if you bend…
I recently lost a shim in the grass at the track when changing the toe, turns out you'd have to buy brand new rear arms to get more plastic shims!! so I designed these. The kit ones are 2mm, so if you want replacements, then print a load…
For SkyRC B6 Neo With .step files Base on : https://www.printables.com/model/921754-skyrc-b6-neo-lipo-charger Take care ! 💙 2025/03/17 - Added feets bumper & minor changes
This is a combined container for both TB6612FNG and NRF24L01 for a more compact setup for the custom remote control receiver for RC. There are three (3) files in this 1) one with bottom opening for motor driver and normal NRF24L01 version…
Entretoise de butée à réaliser en TPU.
Light Modifier - Fits the Neewer RGB61 RGB Video Light. PRINT INSTRUCTIONS: Print with supports for the bottom
THIS MODEL REQUIRES THE JOLLYLOOK SQUARE DEV UNIT TO WORK This custom back allows for shooting Instax square film on the Mamiya RB67 (Pro-S tested only). The included dark slide allows the back to be changed out mid-cartridge. Note: I…
Adapts RB mount lens to Horseman board. slits on the side allow for the user to cock the lens using the lever model. I find it easier to mount the lever to the pin that rests at the top so that you can cock the lens by simply tilting the…
Ive lost this plastic clip, so ive made one.
My Brita pitcher lid broke, and it took way too many revisions due to the infernal mechanism that lifts the lid. Both due to the poor design which puts too much leverage on the very thin hinge plastic on the lid flap it’s highly likely to…
Often the original plastic clip is broken and the back panel of the front seat of your Audi A4 B6 is loose and does not hold anymore in place. With this part you can easily repair it, by just sliding it into the rest of the original clip…
I created both LH and RH versions of the LB600 Casterfoot replacement. This does not look exactly the same as the production version but is a perfectly functional replacement for my broken caster foot
Clips to the base of the GHB VB603 camera babyphone and to a 30 mm wide beam. Prints in place on its side without supports with no further assembly required.
A printable diffuser for the Nikon SB600 flash Instructions Use neutral color filament that lets light through. I printed mine using 3ntr Polyamide 6. Slice using 0% infill, two vertical perimeters. Category: Camera
Just a very simple hardcase for protecting a SkyRC NeoB6-charger. Has a slight additional space (~0.5 mm) on the screen-axis to fit either manual or screen protector. Update 2024-06-03: Uploaded a modified version for the B6AC neo. Just…
All parts printed in 0,2mm layer height PLA (PETG) Prusa speed setting with slightly increased several values that reduced printing time. See attached G-codes. Všetky diely som tlačil vo výške vrstvy 0,2mm pomocou PLA (PETG) na…
Printed clutch pedal cover for VW Passat B6 . Fast printing time . Printed from < TPU >. The cover is specially designed to fit tightly. Thanks to this, we can be sure that it will stick firmly to the foot pedal of the clutch and will not…
DOESN'T FIT THE Pro SD BACKS As the summary says. Printed mine upright in PETG with no supports on the insides. Snaps into place. Gratuitous chamfering because it's chamfers and also because my battery holder for my digital camera…
Print as in pictures with no support. Printed in PETG in pictures. 0.4 nozzle 0.2 height
Cover for Erbauer ERB690CSW Plunge Saw
This is a release of love. Minisforum has a really fun and removable "push" grab lid. It's easily removable. I'm working on a project that requires the M.2 slot to have a PCIe Riser Card pop out of the machine and allow me to hook up a…
Simple installation: just remove one bolt, insert the clip, and re-tighten. Designed to fit precisely the mounting point on the RB-60 frame. Reinforced geometry to resist bending under load. Printed with support.
Imax b6 v2 lacks the cooling fan of a predecessor model, when using it in discharge mode the ballast resistors get quite toasty I took a picture of a side panel, remade it in Onshape, and added a simple duct part that fits on the added…
These are direct replacements for the Whirlpool WDT710PAYB6 Utensil Rack (part# WPW10671904). Save yourself $20. Printing Settings: Print these in a stronger filament like PETG, ABS, etc. Supports needed
Use PETG to fill the print layer with 100% height 0.16mm
Make sure to have at least 4 wall loops theres a lot of leverage.
