Minisforum NAB6 / NAB7 Lid / Top Replacement + M.2 to Ribbon Cable PCIe Riser Slit Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a release of love. Minisforum has a really fun and removable "push" grab lid. It's easily removable. I'm…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 606
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a release of love. Minisforum has a really fun and removable "push" grab lid. It's easily removable. I'm working on a project that requires the M.2 slot to have a PCIe Riser Card pop out of the machine and allow me to hook up a SAS card (for hooking up 8 hard drives).
This was carefully reverse engineered with a set of calipers from harbor freight. I figured I'd release this into the wild for those rocking this wonderful little powerhouse since I needed one for my current project anyway. Choose a cool color! Good luck!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Doesn't Matter
Resolution:
.20
Infill:
30%
Filament: COEX PLA RED, BLUE, BLACK, ETC
Notes:
Take note: The clips will perform better if you allow those tiny TINY supports to print under the lip of the clip. I recommend it.
Printing on a glass bed with no raft gives you that sheen of glass-like reflectivity on the lid, should you choose to make it fancy. :)Category: Electronics