Casing for soldered USB plug / strain relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Casing USB 2 type A breakout board - protects the soldered connection and serves as strain relief for flat ribbon cable
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
Protecting case and strain relief for a soldered USB-Connector, male USB-A 2.0.
Printing:
You need one case and one mirrored case - place the case into the slicer, clone it and mirror the clone along the X or Y asis.
Nozzle 0.2 mm, PETG, Layer height 0.1 mm or Variable layer height (recommended for the clamping sleeve), no support. Print with brim, depending on the bed adhesion change the "brim-object gap" to zero.
Printed with Bambulab X1C and Elegoo PETG on Engineering plate, 3 mm brim, brim-object gap=0, layer height 0.1 mm for the cases and variable layer height for the clamping sleeve.
If the clamping sleeve is too narrow, try scaling in the Y direction (height of the rectangle) by about 102% (depending on your printer and filament).
Cable
At the moment only available for flat ribbon cable with dimensions 1.4 x 4.9 mm.
If I need to prepare a USB connector for another cable, I will add the corresponding model here.
Breakout Board
Suitable for breakout boards 15x15 mm (or less).
There may be tons of different dimensions, one like this should work:
https://aliexpress.com/item/4001170775556.html
Assembly
See pictures. Finally, drip glue to the gap between the cable and the plug.
-------------------------------
The only reward for a hobbyist is likes.
Support / Donation for my work