Screwdriver Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement screwdriver handle.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 718
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is for a screwdriver shaft that has the two flattened tabs on the end (see picture). It took me awhile to dial in the inside diameter for the screwdriver shaft and I left it so you must use some force when installing for long term use.
Print Instructions: Print with a brim (8mm recommended) and 3 perimeter shell/wall count. Infill depends on how long you want it to last. I did 50% with PLA but will probably make another with higher density in ABS.
Specifications: Shaft diameter is 0.25 inches.
Updates: Decreased handle diameter, corrected shaft hole diameter.