1 / 6
Screwdriver Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement screwdriver handle.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 147
- Makes
- 1
- Views
- 718
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is for a screwdriver shaft that has the two flattened tabs on the end (see picture). It took me awhile to dial in the inside diameter for the screwdriver shaft and I left it so you must use some force when installing for long term use.
Print Instructions: Print with a brim (8mm recommended) and 3 perimeter shell/wall count. Infill depends on how long you want it to last. I did 50% with PLA but will probably make another with higher density in ABS.
Specifications: Shaft diameter is 0.25 inches.
Updates: Decreased handle diameter, corrected shaft hole diameter.