Makita DC18SD Charger Mount

I am not sure if Makita changed the design on these DC18SD chargers but when I was looking for a mount, the hole layout that people had used did account for the offset of the top pin, so I designed my own.    I can confirm that this does NOT fit my DC18RCT which looks similar but has different foot spacing.

Designed to attach to the DC18SD charger without screws; pull out the supplied rubber feet and use them, or some printed pins, to push fit through the mounting plate.

Beware if you select the slightly larger pins and print in PLA or PETG rather than TPU, once all four pins are fitted, the charger is hard to remove. This was size 8.43mm for me.    (and why there is no photo of the plate on it's own).    On the plus side, it is surprisingly secure. 

Trial and error may be required to find the perfect fit for your charger and printer / material.

Spacing designed so you can arrange multiple chargers side by side or one above another and still remove the batteries and access the mounting screws.  

Notes on dimensions:

Push pin holes in mounting plate sized to 8.25mm to work with Makita supplied feet, they will need enlarging in the model or just drill out with 8.5mm drill to work with the printed feet - (test hole models provided).  They worked perfectly for me in PLA+ with some trial and error but would be less tolerance dependant printed slightly larger in TPU.  

For reference the hole layout on the charger is 143mm x 121mm with the top right pin (when viewed from the top of the charger) inset left by 7mm.  

Link to TinkerCAD model so you can copy and tweak 

https://www.tinkercad.com/things/e66SRAO9qM2-makita-dc18sd-charger-mount-public?sharecode=fB5dlkfecURxl1DbJiHGhDsRmsB6mRk0WcN4fxxJtag