ProCo RAT2 Dust Cover Set (Reversible Mod)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ProCo RAT2 Guitar Pedal Dust Cover Set (Reversible Mod)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Finally picked up my own RAT pedal and my immediate reaction was "these gaps are going to be a dust magnet" so I modeled these up.
Designed to printed in TPU or other flexible filament for ease of installation but in theory a hard plastic should work as well but may require more disassembly than TPU.
Includes single and mirrored set models for versatility and convenience respectively. No Supports required.
To assemble try squeezing into the gaps and but most likely you will need to loosen the four screws holding the rubber feet on the bottom so you can wiggle the center casing relative to the sides and to get it all together nice and happy like. Happy printing/stompin'!