1 / 6
BioGents BG-Pro Upgrade (Fan on Top) — zdjęcie 1
1 / 6

BioGents BG-Pro Upgrade (Fan on Top)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

BioGents BG-Pro Upgrade (Fan on Top) is a 3d printed solution that enhance the catching efficiency of the device.

Ocena
0 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
335
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Enhanced 3D-Printed Upgrade for BioGents BG-Pro (Top Fan Version)

This is a 3D-printed upgrade designed specifically for the BioGents BG-Pro mosquito trap (with the OEM fan mounted on top). The goal of this modification is to enhance the trap’s capture efficiency by improving airflow and filtering larger, non-target insects.

The design was developed and validated in collaboration with Christophe Paupy from UMR MIVEGEC (IRD), and also tested by Albin Fontaine, researcher at the Armed Forces Biomedical Research Institute.

Modeled and optimized for easy, reliable 3D printing by myself at PSL3D.

 

Printing Guidelines

To ensure best performance and compatibility:

  • Material: Use PETG or stronger (PLA not recommended)
  • Layer height: 0.2 mm or lower to ensure proper fit, especially for threaded parts
  • Wall settings & infill: Standard settings for structural parts (e.g., 2–3 walls, 15–20% infill)

 

Special Instructions:

   Top Grid:

  • No top/bottom layers
  • Infill: ~8% (e.g., grid or cubic pattern)

This generates ~10 mm holes, which prevent clogging from butterflies or other larger unwanted insects while preserving optimal airflow.

   MX Net Holder (net support ring):

  • Requires a small amount of support, just under the part where the net is meant to be secured.
  • No other supports needed elsewhere if oriented properly.

 

Tagi