1 / 3
V-Core 3.1 Door Sealer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seals that go underneath the extrusion joiner bolts. These allow you to properly seal the top of your V-Core 3.1 door.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I've always found that the top of my V-Core 3.1 door doesn't sit against the frame, which sucks if you are trying to heat it. So, these sealers attempt to address that.
This is designed to solve the issue by providing a place for the door to slide under to seal it up. This is designed for 6mm panels, I can provide other depths as well!
Usage
- When installing the door, slide the top under these sealers first, then lower the bottom of the door down against the frame.
Printing
- Print 1 original and 1 mirrored
- Material: ABS/ASA
Happy printing!