1 / 4
Fauxké Ball shell for HyperX Saga / Saga Pro - no MMU needed — zdjęcie 1
1 / 4

Fauxké Ball shell for HyperX Saga / Saga Pro - no MMU needed

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

“Gotta click ‘em all!”

Ocena
0 / 5
Polubienia
15
Pobrania
19
Wydruki
1
Wyświetlenia
239
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Your creature friend will take a good peek at you holding this Fauxké Ball shell for for the HyperX Saga / Saga Pro.

Suggested Print Settings

  • Filament: PLA
  • Perimeters: 2
  • Layer height: 0.15mm
  • Top and bottom layers: 5
  • Infill: 15% gyroid

No MMU is needed.  Just add the colour changes or use the gcode files (for Prusament PLA), which already have them.  If you do it yourself, the model files are already correctly orientated, just insert the colour changes at these heights (with 0.15mm layer heights):

Rear: white, black, red51.80, 57.05
Side button: black: white3.50
Button covers: white, black, red21.95, 27.20
Disc: white, black0.80

The only other thing to print is the “fronts” (front button and front chassis) in red.

Glue the center part in with some Super Glue.  Just a little squirt’ll do the job.

 

2025-07-07 added alternate front for the cabled version of the mouse.

Tagi