1 / 4
Fauxké Ball shell for HyperX Saga / Saga Pro - no MMU needed — image 1
1 / 4

Fauxké Ball shell for HyperX Saga / Saga Pro - no MMU needed

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

“Gotta click ‘em all!”

Rating
0 / 5
Likes
15
Downloads
19
Makes
1
Views
239
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Your creature friend will take a good peek at you holding this Fauxké Ball shell for for the HyperX Saga / Saga Pro.

Suggested Print Settings

  • Filament: PLA
  • Perimeters: 2
  • Layer height: 0.15mm
  • Top and bottom layers: 5
  • Infill: 15% gyroid

No MMU is needed.  Just add the colour changes or use the gcode files (for Prusament PLA), which already have them.  If you do it yourself, the model files are already correctly orientated, just insert the colour changes at these heights (with 0.15mm layer heights):

Rear: white, black, red51.80, 57.05
Side button: black: white3.50
Button covers: white, black, red21.95, 27.20
Disc: white, black0.80

The only other thing to print is the “fronts” (front button and front chassis) in red.

Glue the center part in with some Super Glue.  Just a little squirt’ll do the job.

 

2025-07-07 added alternate front for the cabled version of the mouse.

Tags