2,5 HDD Slide Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for 2,5 HDD with retention clips
- Ocena
- 4,5 / 5
- Polubienia
- 12
- Pobrania
- 122
- Wydruki
- 2
- Wyświetlenia
- 456
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Case for 2,5 HDD. You can easily slide in or out your drive and it has two side clips to hold disk in place. Very convenient for travel protection or cold storage with tags to identify drive content.
Assembly is super straight forward. Both sides of the cover are the same piece, so just print two clones of the .stl file flat on the bed.
Press fit is enough to attach these identical parts together (corners may require you to push hard) but a bit of glue is always a good idea. Better safe than sorry!
There is an alternative version with inner honeycomb pattern to save a bit of filament while keeping good overall toughness. Also looks cool with translucent filaments.
I've tested it with PLA and PETG with great results. Print it with 0.2 layer height and at least 3 wall loops.