Down Range - T-80 Tank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The T-80 tank model for the Down Range wargame. A Russian design used by many countries all over the world.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is intended for use with Down Range, a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare.
This model is for the T-80 tank. Most commonly used by Russia, but a wide variety of T-80 variants are in use worldwide.
While developed initially to print on a Prusa Mk4 printer, this model has been tested on Prusa Mk4, Mk4S, Core One, and XL printers using PLA filament without issue, and should work with most other manufacturers' printers. You may need to experiment with settings if you're printing in another material.
For the best balance between quality and print time, I recommend using an 0.2 mm layer height with organic supports, and leaving the other settings as the default for your printer.
Updated 12 June 2025 to improve tolerances on the turret connector.