Voron or DIN rail Easy Print BTT E2C CAN Bus mount - No assembly - No Inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a far easier and even sturdier way to mount the BTT E2C V2
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please give a like to this model, it helps me justify the time spent making these gadgets.
*** update - I replaced the files with new ones with a more flexible cut out so you can more easily remove the board without breaking the USB-C connector off of it. Arg. The freecad file is V1.1 and cleaned up also.
This is a no hassle DIN rail mount for the BTT U2C V2. It is optimized for 3D printing, so simply print on the flat side without supports. I always felt the standard Voron DIN mounts are fine, but over complicated and usually flimsy. This mount stays on the rail firmly and requires only 4 2mm plastic screws that you already have from all the Voron BOMs.
A FreeCAD file is included for mods or model export.