Voron or DIN rail Easy Print BTT E2C CAN Bus mount - No assembly - No Inserts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a far easier and even sturdier way to mount the BTT E2C V2
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 103
- Makes
- 0
- Views
- 340
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Please give a like to this model, it helps me justify the time spent making these gadgets.
*** update - I replaced the files with new ones with a more flexible cut out so you can more easily remove the board without breaking the USB-C connector off of it. Arg. The freecad file is V1.1 and cleaned up also.
This is a no hassle DIN rail mount for the BTT U2C V2. It is optimized for 3D printing, so simply print on the flat side without supports. I always felt the standard Voron DIN mounts are fine, but over complicated and usually flimsy. This mount stays on the rail firmly and requires only 4 2mm plastic screws that you already have from all the Voron BOMs.
A FreeCAD file is included for mods or model export.