1 / 4
Cat/Dog Feeder Outdoor Rain Cover — zdjęcie 1
1 / 4

Cat/Dog Feeder Outdoor Rain Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple cover that blocks the rain to prevent your food bowl from getting wet. All one piece, prints without supports.

Ocena
0 / 5
Polubienia
7
Pobrania
21
Wydruki
0
Wyświetlenia
121
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial

This rain cover will keep dog or cat food dry when it rains. The inside is on a 15 degree angle, which is more comfortable for cats, and is raised up a bit for added comfort as well. The interior size is about 170x138mm, so it should be able to hold most bowls. There is a small lip to help stop the bowl from sliding, but the bowl should be able to stay from friction for the most part. The sides are enclosed, so rain can't get blown in from the sides. The front has an overhang to help avoid water from dripping off the roof and into the interior. This model is 250mm tall, so it maxes out the build height for X or P series printers. The opening should be big enough for most cats, but for large dogs it probably isn't suitable. No supports are needed if you print it on its back. 

Tagi