608 Pulley
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strong pulley that uses a standard 608 bearing and can be mounted easily with 4 screws.
- Ocena
- 4,857 / 5
- Polubienia
- 169
- Pobrania
- 1154
- Wydruki
- 11
- Wyświetlenia
- 4729
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Very strong pulley that uses a 608 bearing. I designed these to be easily mounted with wood screws and to withstand a lot of weight. They work great with paracord and can be used for a lot of different projects.
Instructions: Use infill % and additional perimeters as needed. For assembly slide a washer in on both sides of the pulley wheel to secure the bearing better. PLA and PETG works fine but recommend using ASA or ABS for heavier applications or anything exposed to heat/sunlight.
Update 7/04/2022: The pulley wheel has been updated with dimensions to increase clearance for cable, cord, rope, etc, specifically designed for this base. I accidently uploaded an old file that was the incorrect diameter.