Logitech Shifter Screw Clamps - Fully Replacement!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Logitech Shifter Screw Clamps - Fully Replacement!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Standard Digital File License
Since I bought a used shifter without any mounts, and so far I have only made a model of the lower main screw, I decided to make a model of the two remaining clamps.
To print:
1. MainUpper - 2x
2. MainLower - 2x
3. Clamp - 2x
4. Peg - 4x
We also need:
1. M6x100 screws - 2x
2. M6 nuts - 4x
3. M6 nuts with a rounded tip (I don't know what it's called exactly) - 2x
The assembly process is trivially simple:
We put the screw in the "MainLower", press 2x "Peg" into the holes and put "MainUpper" on it - we can also use some glue, although in my case it wasn't even necessary.
Next, we have to put two nuts in the "Clamp" - one at the top, the other at the bottom. After mounting it in the Shifter, we screw the nut with the rounded tip on the bottom - that's all. :)