1 / 3
3/4'' to M27x2.2 Coupling for Gardena Rain Hose — zdjęcie 1
1 / 3

3/4'' to M27x2.2 Coupling for Gardena Rain Hose

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print-In-Place 3/4'' Female to M27x2.2 Female Connector for Gardena Rain Hose

Ocena
5 / 5
Polubienia
18
Pobrania
71
Wydruki
1
Wyświetlenia
507
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a ¾ inch female to M27x2.2 female threaded coupling, designed as a print-in-place model. It allows you to connect a ¾'' male threaded fitting to a Gardena Rain Hose.

After printing, pull the coupling apart to expose the internal threads, then insert the gaskets.

ASA is recommended for its UV resistance and because it can be vapor smoothed with acetone.

To ensure a watertight seal, I printed this with 100% infill and vapor smoothed the gasket contact surfaces. The model is designed so that all gasket interfaces are printed flat.

A simple wrench is included in the original model to help tighten the coupling by hand.

Tagi