1 / 3
3/4'' to M27x2.2 Coupling for Gardena Rain Hose — image 1
1 / 3

3/4'' to M27x2.2 Coupling for Gardena Rain Hose

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print-In-Place 3/4'' Female to M27x2.2 Female Connector for Gardena Rain Hose

Rating
5 / 5
Likes
18
Downloads
71
Makes
1
Views
508
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

This is a ¾ inch female to M27x2.2 female threaded coupling, designed as a print-in-place model. It allows you to connect a ¾'' male threaded fitting to a Gardena Rain Hose.

After printing, pull the coupling apart to expose the internal threads, then insert the gaskets.

ASA is recommended for its UV resistance and because it can be vapor smoothed with acetone.

To ensure a watertight seal, I printed this with 100% infill and vapor smoothed the gasket contact surfaces. The model is designed so that all gasket interfaces are printed flat.

A simple wrench is included in the original model to help tighten the coupling by hand.

Tags