1 / 5
RC Ramp Monster Truck – Grave Digger Jump (Remix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Radio Controlled Car Ramp Monter Truck
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 587
- Wydruki
- 2
- Wyświetlenia
- 1783
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (66)Powiązane
Printing & Assembly instructions
Print the Ramp on its side, I also recommend printing with an Inner Brim 3mm if you are concerned about low bed adhesion. I printed at layer hight of .35 for speed and 10% Rectilinear infill two Perimeters three Top & Bottom Solid layers.
Filament:
Sunlu PLA+ Green.
If you have any questions, please feel free to contact me & please share your makes.
Big thankyou to @CaptMerciles_2092366 for the orginal design.