Removable Desk Storage Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clean up your desktop with this convenient storage container
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 146
- Wydruki
- 1
- Wyświetlenia
- 581
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Clean up your desktop with this convenient storage container that attaches to the side of your desk to hold all your pens, pencils, tools etc. etc. etc. Easy to remove from the clamp and move it to where you are working or need it.
This has been designed with ease of printing in mind, no rafts, brims or supports are needed, just slice, print and enjoy.
The hexagonal pattern gives an aesthetically pleasing look while reducing filament use and weight but still maintaining its strength to hold what you need in it.
The desk bracket is suitable for desktop thicknesses of 15-50mm.
Included in the files are versions for mounting on the right-hand side of your desk (Desk basket RHS mount.stl) or the left-hand side (Desk basket LHS mount.stl). The Desk Bracket is suitable for both the RHS and LHS versions.
My pictures in the gallery show the LHS version.
Check out my other designs at:
If you think the design is ok, hit the like button. Or if you've got some improvement ideas, or anything else, leave it in the comments.
If you print it, leave a pic in the Makes, I'd like to see it.
Print settings I used:
0.2mm layer height
15% gyroid infill
2 walls (3 walls minimum I would suggest for the screw to increase strength)
NOTE: to avoid using supports, print the desk bracket part in the orientation/direction shown in the gallery pic