1 / 4
Protective Cover for DJI LiDAR Focus Pro Unit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since the LiDAR Unit doesnt come with a Cover for protection when mounted on a Rig, i decided to design this one for it.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since the LiDAR Unit doesnt come with a Cover for protection when mounted on a Rig, i decided to design this one for it.
- No extra fastening, sits firm
- Spacing for foam rubber for better protection
- Fits when mounted on standard LiDAR Cold-Shoe mount and also aftermarket Nitze Rod Mount (as shown in pictures)
- Logos for easy recognization
- Easy Print: Can be printed with PLA or PETG
Important:
I added 2mm spacing on each side to be able to add foam rubber as paddings in the inside to further protect the lens.
Without the padding your lens wont be properly protected and the housing will be scratched.
The foam rubber allows the lens cap to stay firmly on the LiDAR and doesnt need any extra fastening.