1 / 5
Rear Wing for OpenRC F1 based on 2022-2025 cars
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OpenRC F1 Rear Wing for a better looking rear and a little bit of downforce added.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 183
- Wydruki
- 0
- Wyświetlenia
- 917
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this custom rear wing for my OpenRC F1 because the stock one didn’t quite match the style I was going for. This design is inspired by McLaren’s 2024 rear wing and offers a more aggressive and modern look.
The diffuser is integrated directly into the wing, so no separate part is needed. While I didn’t originally design it with aerodynamics in mind, I did notice a slight increase in rear downforce after installing it, which was a pleasant surprise.
Assembly:
- 2x M3 x 10mm screws
- 2x M3 nuts
Please support me on MakerWorld:
Here