P
Printables
John Deere 20 series hood for openrc tractor mk3
an updated john Deere styled hood for openrc tractor mk3 from wekeas original version (https://www.myminifactory.com/)
Wyniki wyszukiwania: openrc
Liczymy pasujące modele…
P
Printables
OpenRC F1 Differential with Belt Pulley
OpenRC F1 Differential: Belt-Driven (Reduced Wobble) This remix addresses the common issue of shaft sway and wobbling found in many OpenRC F1 differential designs. By utilizing three identical bearings (the same ones used in the front…
P
Printables
Traxxas BL-2S Motor Mounts and Rear Bodywork for OpenRC F1
Overview: I bought the Traxxas BL-2S system from my local hobby shop thinking that it would fit. Boy, was I wrong. In an effort to save myself some money, I used my CAD skills to accommodate the larger motor. The parts bolt to the chassis…
P
Printables
OpenRC Tractor MK2.4 Ford 4400 Industrial mod
ORC Tractor Mk 2.4 Ford 4400 Industrial mod. Alternative version of the Ford 4000. Filament used Deeplee Sky Blue & Elegoo Sunshine yellow PLA. Layer height 0.16 (0.12 for grille, badging & exhaust). Assembly as per original 2.4 tractor.
P
Printables
7mm Hex, Rear Axle, & Wheels (OpenRC F1)
Replaces the original rear axle & wheels which are prone to rounding out under loads higher than a brushed motor. This design includes the axle, F104 Rear Wheels, and the Rear Wheel Nuts. Everything should print fine with standard…
P
Printables
OpenRC F1 2022 Rear Wing - 4mm Reinforced Mount
This is a reinforced remix of the OpenRC F1 2022 Rear Wing . The original design is fantastic but has a weak point: the 2mm mounting section that connects the wing to the chassis. During high-speed runs or minor impacts, this area is…
P
Printables
openrc f1 electronics holder (exc. battery)
This is a custom electronics holder designed specifically for the OpenRC F1 . It provides a dedicated, compact space for your receiver and speed controller to keep your chassis organized. Compatibility: * RX: Beta 2.4GHz PWM Micro RX ESC:…
P
Printables
OpenRC F1 2025 (unfinished)
Due to not having the time or energy to fully finish this project, there are some minor things to work around. I've attached the STEP and Fusion files for anyone who wants to have a look. This project is designed to retain the original…
P
Printables
OpenRC F1 Advanced Aero Package
Hello! After more than a year of using great, OpenRC F1 designed by Daniel Noree, we decided to take on the challenge of designing a working aerodynamic package for the project, and here it is! AERODYNAMICS & PERFORMANCE It's a package of…
P
Printables
Larger Servo Holder for OpenRC F1 Car
Accidentally ordered a servo motor that was bigger than the one that the stock OpenRC F1 holder is designed for. Instead of ordering more servos, I designed a new holder! Fits my servo perfectly, not sure about all servos of this size…
P
Printables
OpenRC F1 2024
This is the OpenRC f1 2024 USE PETG There are 2 diffusers. one is designed for Velocity Projects aero package and the “normal one” can fit to the original floor To make the dual color use a lighter of a heat gun to bend the pieces to size…
P
Printables
OpenRC F1 Dual Material Spur & Pinion Gears
Modified gear set for the OpenRC F1. Designed to be printer with two compatible materials. I have used Taulman's 910 for the teeth and ColorFabb's PA-CF for the hubs. For other available filaments visit |…
P
Printables
OpenRC F1 Dual Colour Rims
Modified front and rear rims for dual colour or material printing. I have used E3D's White and Blue Edge. Scaffold Snap is used as a support material to keep all the parts together. For other available filaments visit |…
P
Printables
OpenRC F1 Front Wheel Axle 12mm Hex 1/10 Wheel adaptor - for display models
FOR DISPLAY PURPOSES AS WILL MAKE THE WHEEL FIXED Front wheel axle from OpenRC project adapted to take a 12mm hex wheel that is common on 1/10 scale cars. Even on fully built cars can be changed to this part with removal of one screw in…
P
Printables
OpenRC Tractor MK3 TEA20 XL
Update 12-01-2025 Part 40a was not the final version and it didn't fit, now is corrected. Part 4-2a (standard fit) was not correct, now is corrected Added parts 4-2a and 4-2b with even higher tolerance (loose fit). Update 08-01-2025…
P
Printables
Rear Rim for OpenRC F1 Differential 2017
Note 10/10/2017: I've had two people comment that this wheel isn't working properly with the axle and bearing. I've marked as work in progress so print at your own risk and I'll update the design or post any new information on how to make…
P
Printables
OpenRC F1 ReEnforced Axle 1/8th Inch Steel Rod
Go to hardware shop, get 1/8th inch steel rod, pause print, insert rod, stronger axle, good times, have fun.
P
Printables
OpenRC F1 Suspension Mod - Shorter Swing Arms & Wheel Hub
Shorter swing arms for shorter wheel base, I didn't like how wide the front wheels were, and how far they were from the fender/wheelwell. Print thick, many walls, petg, strong print, good happy rc times.
P
Printables
OpenRC F1 12mm hex conversion front wheels
Remix of the original front wheel hub and axle to fit standard 12mm hex wheels without changing track width (too much)
P
Printables
OpenRC Tractor MK3 linear actuator MOD
I redesigned some parts to accommodate linear actuators to power rear arms on my MK3 TEA20. That gives it much more power and control. It's less scale than original design but it's much more fun to play with. To be honest, I tried the…
P
Printables
OpenRC F1 2017 improved rear axis
OpenRC F1 2017 improved rear axis with metal pin inside. There is a hole inside the model. The print must be paused at height of 5.2mm, then the pin can be inserted and the print can be resumed. The result is a very strong rear axis that…
P
Printables
OpenRC F1 Holo -Add-on
This part is hard to print nicely. From the top is acceptable. Need to be glued and the dimension should be adjusted to your model. https://www.prusaprinters.org/prints/2714-openrc-f1-car-110-rc-car
P
Printables
OpenRC F1 Spur Gear Locker
https://www.prusaprinters.org/prints/2714-openrc-f1-car-110-rc-car/remixes
P
Printables
OpenRC F1 Pirelli P-Zero branded tire print without MMU
For both tire and name, I use FLEX material. MMU is not needed printer will ask to change material when it will be needed. Please note that name is only on one side.…
P
Printables
OpenRc Tractor MK3 Ford 8N Mod
Die Motorhaube, der Kühlergrill und das Lenkrad wurden neu entworfen.
P
Printables
OpenRc Tractor MK3 Hinterreifen und Felgen Breit
Die hinteren Felgenbetten wurden verbreitert und auch der Reifen wurde verbreitert.
P
Printables
OpenRc Tractor Deutz F1L 514 Bj. 1951
Deutz F1L Knubbel Baujahr 1951 im Maßstab 1:10. Er ist zu 99% von mir konstruiert und das in tagelanger Arbeit. :) Benötigtes Zubehör siehe BOM OpenRc Tractor MK2.4. Die Ketten auf den Fotos kommen eventuell bald als Zubehör. Der…
P
Printables
OpenRc Tractor Lifter MOD N20-Motor
Eine Heckhydraulik mit sehr viel Kraft und mit einfachen N20-Motoren mit 55mm M4 Gewinde.
P
Printables
Rear Wing for OpenRC F1 based on 2022-2025 cars
I designed this custom rear wing for my OpenRC F1 because the stock one didn’t quite match the style I was going for. This design is inspired by McLaren’s 2024 rear wing and offers a more aggressive and modern look. The diffuser is…
P
Printables
OpenRC Tractor DUPLO Seat
A remix of the seat for the OpenRC Tractor MK3 TEA20 that allows to place a DUPLO charachter on it.
P
Printables
Customizable Stackable 1/10 Tire Rack for OpenRC - Shorter Top Rail
The original design was too tall to fit within my ikea kalax shelfs. Shortened the top rail mount so that it only adds one shelf and not two. Ideal for smaller spaces or if you simply have less tires to store.
P
Printables
OpenRC 65T Spur Gear Vase
The base of the vase have the exact profile as the original spur gear. The vases on the pictures are printed on a ZYYX 3D printer with a enlarged nozzle (1.0mm) and the layers are 1.0mm.Print speed kept to a minimum (5.0mm/s) for optimal…
P
Printables
Battery box for Openrc tractor XL
Battery box for Openrc tractor XL. If you want more weight you can insert more weight into box.
P
Printables
John Deere 20 series hood for openrc tractor mk3
an updated john Deere styled hood for openrc tractor mk3 from wekeas original version (https://www.myminifactory.com/)
P
Printables
OpenRC F1 Metal Gear Mod
My printed gears kept stripping out so I wanted to replace them with steel gears. There is a set on amazon that roughly matches the dimensions used in the original -- "Hot Racing STE258 Steel Pinion and Spur Gear Set (18T/58T 32P)(Blue) -…
P
Printables
OpenRCF1 Improved Square Axle
This is my design for an improved axle and accompanying parts. 3rd and 4th photos are the aftermath of the old parts and why I made new ones. Feel free to email me [email protected] or message me if you have any questions or…
P
Printables
OpenRC tractor XL trailer
Free trailer for your OpenRC tractor XL. Can transport material. 5kg of material is ok. USE LONGEST SCREWS AS YOU CAN Screws M3 Bearings 12x18x4 4pcs
P
Printables
Yet another OpenRC F1 electronics holder
I printed several different electronic holders and none of them could fit my parts, so I decided to create my very own holder. I designed it to hold a battery, ESC, receiver and the on/off switch. Parts that fit: Hobbyking GT2E AFHDS 2A…
P
Printables
OpenRC 3RC remix (trike)
I like to drive something a bit different. I've nearly finished my OpenRC truggy and need something new to play with. Version 1 of my remix of barspin's truggy. I haven't got a working printer right now so I won't be able to print it just…
P
Printables
OpenRC Wheel Nut Wrench extended
15mm longer than the original for deep wheels Category: R/C Vehicles
P
Printables
OpenRC F1 Guide and Remixed Parts List
OpenRC F1: My Ultimate "Original" Remix Collection The original OpenRC F1 remains a classic, but tracking down the best community upgrades across dozens of pages is a headache. I’ve compiled this "best-of" collection based on my own…
P
Printables
Adjustable Coupling Bar for OpenRC F1
Adjustable coupling bar to connect the servo saver of an OpenRC F1 car to the servo motor. Tighten the nut near the head of the M3x30 bolt to secure the servo saver side the bring another nut down near the first. These don't need to be…
P
Printables
OpenRC F1 Differential with Belt Pulley
OpenRC F1 Differential: Belt-Driven (Reduced Wobble) This remix addresses the common issue of shaft sway and wobbling found in many OpenRC F1 differential designs. By utilizing three identical bearings (the same ones used in the front…
P
Printables
Water-Proofing Upgrades for OpenRC F1 22'-23' AERO
Upgraded AERO plates for OpenRC F1 22'-23'. Fixes problems with water slightly pooling inside main body compartment. If you know anything about electronics you would know that “water + electronics = bad”. When driving in a straight line…
P
Printables
OpenRC F1 Silicone Molding For Low Profile Tire Rims
V5 Update: 06.Nov.2025 . Updated the bottom mold to include inward-leaning pillars along the rim, which help align it properly within the mold. Centering the rim ensures proper balance. OpenRC F1 Silicone Molding For Low Profile Tire Rims…
P
Printables
Command-Strip Wall Mount bracket for OpenRC F1 car
Printed with supports, this bracket allows you to wall-mount an OpenRC F1 car with just a command strip. Printed in PETG using variable layer height, although I'm sure pretty much anything will work.
P
Printables
Traxxas BL-2S Motor Mounts and Rear Bodywork for OpenRC F1
Overview: I bought the Traxxas BL-2S system from my local hobby shop thinking that it would fit. Boy, was I wrong. In an effort to save myself some money, I used my CAD skills to accommodate the larger motor. The parts bolt to the chassis…
P
Printables
OpenRC Tractor Mk3 TEA20 - Revised Rear Axle
This is an updated axle to the OpenRC Mk3 Tractor, resized and revised to fit better and eliminate slippage issues on the original part. The updated version fits much more securely onto the motor shaft, with the wheel bearing working to…
P
Printables
7mm Hex, Rear Axle, & Wheels (OpenRC F1)
Replaces the original rear axle & wheels which are prone to rounding out under loads higher than a brushed motor. This design includes the axle, F104 Rear Wheels, and the Rear Wheel Nuts. Everything should print fine with standard…
P
Printables
OpenRC F1 Servo Saver Connector for TSS-10HM
OpenRC F1 Servo Saver Connector for Turnigy™ TSS-10HM/TSS-10MG Micro Servo.
P
Printables
OpenRC F1 2017 - Steering limiter
The limiters prevent rotation of the servo saver's by more than 31 degrees to the left/right. They should be glued to the Front Lower BOM.
P
Printables
Generative Design OpenRC Truggy Shock Tower
For a university project we had to design parts for the OpenRC Truggy. Our group focused on generative deisgn with integrated functions for the rest of the chassis. We used Autodesk Fusion 360 and Autodesk Inventor. This part is our…
P
Printables
OpenRC F1 2022 Rear Wing - 4mm Reinforced Mount
This is a reinforced remix of the OpenRC F1 2022 Rear Wing . The original design is fantastic but has a weak point: the 2mm mounting section that connects the wing to the chassis. During high-speed runs or minor impacts, this area is…
P
Printables
openrc f1 electronics holder (exc. battery)
This is a custom electronics holder designed specifically for the OpenRC F1 . It provides a dedicated, compact space for your receiver and speed controller to keep your chassis organized. Compatibility: * RX: Beta 2.4GHz PWM Micro RX ESC:…
P
Printables
12mm Hex OpenRC GoKart Rear Axle 8mm
This model is designed to use an axle with an external diameter of 8mm for the OpenRC GoKart, a 12mm Hexagon perfect for any rim. On the inside, it has a countersunk hole where a screw is placed and the wheel is screwed on.
P
Printables
OpenRC GoKart 200% (Large Scale Version)
Ready to build a GIANT Version of the @ChristianErazo Open RC Go Kart as seen on my YouTube Channel BeyondRC! This is a remix of the OpenRC Go-Kart scaled to 200% effectively making this a quarter scale RC go kart fully printable at home…
P
Printables
Servo arm for 18th scale OpenRC F1
This is a servo arm for the 18th Scale OpenRC F1. It fits on the 3,7g cheap ebay servos. I used my soldering iron to quickly melt the inside of the hole and quickly pushed the servo arm onto the servo to get the teeth marks inside. After…
P
Printables
Geared hub for OpenRC tractor motor mod
A 3.8:1 planetary gear hub. This will bring the drive ratio to 16.72:1 for the 44 tooth gear, or 19:1 for the 50 tooth gear ( https://www.thingiverse.com/thing:2736589 ) You will need to print 8 planet gears and bearing retainers, and 2…
P
Printables
OpenRC 1:10 RC Truggy Rim for Monster Truck 10-Spoke Tires
This is remix of original OpenRC 1:10 4WD Truggy Concept RC Car Rims. I used HobbyKing tires: https://hobbyking.com/en\_us/hobbykingr-1-10-monster-truck-10-spoke-black-wheel-block-pattern-tire-12mm-hex-2pc.html And adjust create new rims…
P
Printables
OpenRC Parametric Chinook
OpenRC Parametric Chinook. Software: https://github.com/projunk/ChinookESP32 This is a parametric version of Tom Stanton's Chinook design. I have tried to make the Chinook fly using a naze32 flight controller with both cleanflight and…
P
Printables
Experimental Parts for 18th scale OpenRC F1
Testing out some experimental parts for the 18th Scale OpenRC F1. These parts are not yet intended for general use. The may not work properly or even print properly. Use them at your own risk. Category: Vehicles
P
Printables
1:18 Scale OpenRC F1 Radio Controlled Car
This is my 1:18 Scale version of Daniel Norée's fantastic OpenRC F1. 3D Printed Parts: I printed all of the 3D printed parts in PLA apart from the tires and the front wing which I printed in FFF World FlexiSMART. The PLA parts were…
P
Printables
Mini 8ight battery plate (OpenRC)
UPDATE Version 3 of the battery plate changes: -Moved uprights in to improve driveshaft clearance -Moved mounting holes to better align with chassis holes -Thickened bottom plate -Increased velcro strap clearance -Added gussets to the…
P
Printables
Mini 8ight Rear Wing (OpenRC)
This is a rear wing for a 1/14 scale buggy or truggy. It is designed specifically for the Losi Mini 8ight but would probably work well with the Mini E-Revo or the RC18 This is the third version with minor changes each time. I am still…
P
Printables
OpenRC F1 Car - Holder for 2212 brushless
English V2 : Added more space for the 2212 and different gears. Modifications to be able to run the openRC F1 Car with the cheap A2212 Brushless . With these two pieces one can drive the openRC F1 with it. I did this to make this build…
P
Printables
OpenRC Calibration Cube
Before you start printing the OpenRC F1 that uses pockets to fit the small M3 nuts and see if you need to calibrate your printer for them to fit. Even if this comes out good, make sure you test the m3 nuts in the first 3dprinted part…
P
Printables
OpenRC F1 Dual Color McLaren Edition
This is a OpenRC F1 body inspired by the 2017 McLaren livery. It´s meant to be printed using dual extrusion. I have printed it using a BCN3D Sigma. There are two STL´s per part. Color1 and Color2. the color name is consistent and the same…
P
Printables
OpenRC F1 GoPro Longneck Mount
For those that feel the need to get those close up shots while racing their OpenRC F1 car around the neighborhood. It´s meant to be used together with the "GoPro Seat Mount" found here:…
P
Printables
OpenRC F1 GoPro Mount
Simple GoPro mount that´s mounted using a countersunk M3x8 screw in the cockpit mounting hole and a M3 nut in the mount itself. Printed standing and it´s not meant to with stand great forces. You also need a M5 nut for the GoPro "screw".
P
Printables
OpenRC F1 Car Front Wheel Hub & Axle Merged
Merged the two parts together, front wheel hub and the axle, to make them sturdier. Also, the axle is not fully hollow anymore, which strengthens it a bit.
P
Printables
OpenRC F1 Rear Chassis 2017 Version for Tamiya F104 Tires
Slight edit to the rear edges of the chassis to add clearance for the Tamiya f104 tires, which rub on the stock chassis. This is the rear for the 2017 version chassis.
P
Printables
ACR Dodge Viper OpenRC 1:10 RC Car
Dodge Viper ACR V1 I made significant modifications to many parts from OpenRC F1 by barspin. You will most likely not be able to use any parts from that build. ACR Viper Model by stunner2211 has been modified to be able to print in…
P
Printables
OpenRC F1 2022 Wheels
Update of the OpenRC F1 Tires and Hubs to the 2022 F1 specs. Original Files from Daniel Noree Follow along for more updated parts for the 2022 Car Updated Rear Rims due to sizing error
P
Printables
OpenRC F1 2022 Front Winglets
This is a reprint of the Wheel hubs on the car which now include the winglets seen over the front tires of the 2022 F1 cars. Original Files from Daniel Noree Follow along for more updates to the 2022 F1 Car
P
Printables
OpenRC F1 Rear Axle Holder Right for Brushless Motor
This is an update to the OpenRC F1 Rear Right Axle Holder that adds clearance for the Brushless Motor. I removed some of the area around the bearing race so the motor will sit square on the bracket when tightened down.
P
Printables
OpenRC F1 2022 Shark Fin
The Shark Fin for the 2022 F1 car. While many teams have various designs I followed the design used on the 2022 F1 concept car. Little more curvy. Original Files from Daniel Noree Follow along for more updaes as the OpenRC 2022 build…
P
Printables
OpenRC F1 2022 - Chassis plate
OpenRC F1 2022 car updated chassis. PLEASE NOTE: The lid is typically held on by the turning veins which are not present on the 2022 cars so untill an updated body is done I have not determined how to hold down the lid Original files by…
P
Printables
OpenRC F1 2022 Rear Wing
This is the Rear Wing designed for the OpenRC F1 2022 Car insipired by teh 2022 F1 cars Original files by Daniel Noree Follow along for more updated 2022 F1 car files
P
Printables
OpenRC F1 2022 Front Wing & Nose
This is the Front Wing & Nose designed for the OpenRC F1 2022 Car insipired by the 2022 F1 cars Original files by Daniel Noree Follow along for more updated 2022 F1 car files
P
Printables
OpenRC F1 2022 Car - Full Part Set
This is a Remix of the OpenRC F1 car by Daniel Noree Video of car: Complete set of parts needed to build functional RC car. Not just the updated parts. Also contains remixed parts I prefered over the original Noree designs. All credit has…
P
Printables
OpenRC F1 2022 - Front Body and Mirrors
This is the Front Wing & Nose designed for the OpenRC F1 2022 Car insipired by the 2022 F1 cars Original files by Daniel Noree Follow along for more updated 2022 F1 car files
P
Printables
OpenRC F1 2022 Front Spoiler / Wing
This is remix of a great 2022 OpenRC F1 project, see link. This remix is for the front wing for a 4 fin design, original plate without nose, slight front lip, hidden extra support beneath wing to fasten to nose.
P
Printables
Bevel Gear For Tatra 813 openRC
This is a gear I designed (from step drawing from mcmaster car partfor the TATRA 813 RC project. The Total mounting depth for The TATRA project from shaft centre to shaft centre needs to be 23.5mm according to my measurements. Subtracting…
P
Printables
Bearing - 8x12x3 - OpenRC F1 Front Wheel
I have some OpenRC F1 cars that are only being displayed and won't be driven (anymore). I didn't want to waste actual bearings by having them sit on the car, but the bearings are required for the wheels and axels to fit together…
P
Printables
Bearing - 12x18x4 - OpenRC F1 Rear Wheel
I have some OpenRC F1 cars that are only being displayed and won't be driven (anymore). I didn't want to waste actual bearings by having them sit on the car, but the bearings are required for the wheels and axels to fit together…
P
Printables
OpenRC F1 Wall Mount
Simple OpenRC F1 wall mount for the 2019 Updated Front Wing Print instructions Rafts: Doesn't Matter Supports: No Resolution: .15 Infill: 25%
P
Printables
OpenRC F1 car - 1:10 RC Car
Build guide: http://danielnoree.com/the-openrc-f1-build-guide/ Questions & Answers: http://danielnoree.com/openrc-questions/ OpenRC Electronics: http://danielnoree.com/openrc-electronics/ Consider supporting me on Patreon:…
P
Printables
OpenRC F1 Front suspension servo saver remix for MG90S
This is a remix of marcotheboy's design, original is on Thingiverse https://www.thingiverse.com/thing:2724542 The original version can't be used with a MG90S servo : there is not enough space when the car is fully mounted for the servo…
P
Printables
Tesla CyberTruck Body for OpenRC F1 RC Race Car
A Tesla CyberTruck body that bolts on to the OpenRC F1 car with no mods to the car chassis. Print instructions After my son printed a 200% version of the CyberTruck model from https://www.thingiverse.com/thing:4063298 , it suddenly…
P
Printables
OpenRC F1 Car 1:10 Standard Wheel Adapters
Standard 1:10 RC car wheel adapters. Print instructions 3D printed tires weren't cutting it for us on our OpenRC F1 cars. I made these adapters so we could mount cheap, standard 1:10 RC street tires and wheels on them. We've only just…
P
Printables
![[Demo] OpenRC F1 Advanced Aero Package](https://media.printables.com/media/prints/281077/images/2490169_8a8c0469-c33e-4dd7-bd26-dd1a495a8bad/13.png)
[Demo] OpenRC F1 Advanced Aero Package
Hello! After more than a year of using great, OpenRC F1 designed by Daniel Noree, we decided to take on the challenge of designing a working aerodynamic package for the project, and here it is! It's a package of working ground effect…
P
Printables
OpenRC F1 Crash Safe Front Wing
This is a remix of the wing from the OpenRC F1 2019 .step file uploaded on Daniel Noree's Patreon. We adapted it to use the energy absorption block from the project: https://www.thingiverse.com/thing:3916216 You can see the application of…
P
Printables
Gosainthan, Competition RC Rock Crawler (Super Class) OpenRC
THIS PROJECT IS STILL ON PROGRESS, WILL BE UPDATED PERIODICALLY. This is the design of a Competition RC Rock Crawler for the Super Class competition category. This kind of RC cars are not designed for speed they are designed to climb over…