1 / 4
Prusa XL Buddy electronics cover with 60mm fan — zdjęcie 1
1 / 4

Prusa XL Buddy electronics cover with 60mm fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Prusa XL electronics back cover for 60mm fan cooling.

Ocena
5 / 5
Polubienia
24
Pobrania
102
Wydruki
5
Wyświetlenia
490
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I have received a few times the error of the electronics overheating in the Prusa XL (long prints in relatively hot room). The original metal cover has no ventilation.

I was inspired by similar covers and made my own with a fan on the inside of the cover and a fine cover mesh with enough airflow.

You need a 60mm fan (max 15mm height is recommended) and standard fan screws. If you want to connect to the power screws of buddy electronics. You also need 24V fan (note very common for 60mm fans) or a step-down converter from 24V to 12V (1A should be more than enough for common PC fans).

I highly recommend using a prepared 3mf slicer project (it contains modifier settings for the fan mesh).

Tagi