DUST COLLECTION ADAPTER 100MM (4') BLAST GATE TO 90MM PVC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This simple adapter allows the connection of a 90mm PVC stormwater pipe to a cheap plastic nominally 100mm blast gate.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 1947
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is one of a series of dust collection ports that can be found at this link:
DUST COLLECTION FITTINGS.
This is a very simple adapter which allows a neat fit between a 90mm PVC stormwater pipe and a standard “economy” model 100mm blast gate.
The internal diameter of the gate is considerably less than 100mm, so much less so that the 90mm pipe is a loose fit inside it.
This adapter has a tapered end to match the flange on the gate, and is a snug fit over the pvc. A little PFTE (teflon) plumbers tape will make fitting and maintaining the joint easier.