1 / 4
25mm to 30mm fan adapter for Qidi x-Smart
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter enables the use of a 30mm fan with the X-Smart heatsink
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 222
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (11)Powiązane
The stock 25 mm heatsink fan on Qidi x-Smart printers is too small for the task. As a result, the hot end suffers from heat creep and clogs all too often.
This adapter lets you fit a 30 mm fan to the x-Smart heatsink and includes a duct that directs airflow around it for much better cooling. I printed mine with PETG. You also need 2 x M2.5x6 bolts, readily available on Amazon.
Since installing it, I’ve been running prints for months without a single head clog.