Eva CoreXY backplate Papst EBM RLF 35-8/14 N
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Backplate Eva for the Papst EBM fan
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 1477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Update 10-02-2022: Andi3D made also the Cartesian version that can be used on the Minion.
https://www.prusaprinters.org/prints/131960-eva-backplate-cartesian-for-pabst-ebm-fan
Update 07-02-2022: Modified the inserts a bit as these where for 5mm inserts.
Added a version wit 4mm holes for the 4.6mm inserts.
Update 06-02-2022: After printing the final version i noticed a thin wall.
So please check sliced preview and if needed turn on Thin wall detection!
STL & Step files have the fix for that thin wall.
Since i was running on my Vcore 3 various fan setups but i wasn't happy with all of them i wanted some powerfull fan that is not introducing resonances / vibration.
Setups before where Dual GDSTime 5015 but these fans resonate / vibrate like crazy and the Sunon 7530 what worked very well but was extreme bulky and added quite a bit of weight to the EVA.
For that i switched to the PAPST EBM as this has a good volume flow and high backpressure.
Test shown that the cooling was better then the Sunon 7530 and thus for me the reason to create this.
Exact model: https://www.ebmpapst.com/de/en/products/centrifugal-fans/p/RLF35814N.html
This design is the work of 3 people together as during the process great feedback came and they assisted to change the designs.
So many thanks to 3D_Genosse and Andi3D aka Tiga for their help, design and assistance.
Printing instructions:
PETG/ABS/ASA 30% Gyroid, 4 walls / top / bottom
No supports required just lat the part flat on it's back.
Best to use the EVA 2.4 fan ducts as they fit on this design (Monster duct doesnt fit)
Many thanks to the whole team of EVA for their initial designs.
Any questions? you can find me on discord: @pinky#1302 or telegram: https://t.me/Druckerplausch (German Telegram group)