Wera Kraftform XXL3 Multiboard mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiboard mount for Wera Kraftform XXL3 driver kit.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Was lookng around various model sites to find a holder for the Wera Kraftform XXL3 kit of drivers, without any luck, so I created my own. The idea was to keep the holder as compact as possible and flush to the Multiboard. The mount is 225mm wide and 25mm tall, keeping it within the grid of the Multiboard, so you can mount other things right up next to it, saving space on the wall.
To mount it you will need:
2 x Multiconnect "Flush Big, Coin Slot, Foldable"
Available here
There are slots in the back for more Multiconnect mounts, but 2 is more than enough to handle all the drivers.
Printed with PLA and standard Multiboard print settings.