Sovol SV08 ::: 8010 Fan Bracket Control Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sovol SV08 - 8010 Fan Bracket Control Board
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 214
- Wydruki
- 3
- Wyświetlenia
- 972
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Standard Digital File License
I’ve designed a simple yet highly effective fan bracket to replace the bulky factory-installed one. This custom bracket fully covers the control board (mainboard) while still allowing for excellent ventilation. It’s designed for use with a 24V 8010 fan, which offers significantly better cooling performance compared to the stock fan.
The bracket mounts using two existing holes in the printer’s frame, along with two of the original mounting points from the factory bracket.
To complete the installation, you’ll need:
Four (4) M3 nuts
Four (4) M3 x 14mm socket head screws
Two (2) M4 x 14mm button head screws
One (1) 24v 8010 fan
I have included a picture of the factory holes in the frame that are used for this bracket.
Recommended Print Settings:
3 Walls
3 Upper Layers
3 Lower Layers
15% Gyroid Infill
Supports